Plug&Play Balcony Solar Power System 600W with EVT 560 Microinverter

Plug&Play Balcony Solar Power System is a compact solar solution designed to generate electricity from sunlight for residential use. The system is designed for installation on balconies, walls, gardens or other suitable outdoor locations and combines two high-efficiency monocrystalline solar panels, a microinverter, balcony mounting brackets, a smart Wi-Fi plug and an AC cable.

Balcony Solar System for Home Energy Generation

The system allows unused balcony or other suitable space to be used for solar electricity generation. It includes two DHM54T35MR solar panels with a rated range of 395 to 415W each, with a maximum specified output of 415W per panel. The panels use 182 multi bus bar monocrystalline silicon cells and have a specified conversion efficiency of up to 21.25%.

Two Solar Panels up to 415W Each

The kit includes 2 × DHM54T35MR/395-415W PV panels. Their compact dimensions are designed for installations where available space is limited. According to the supplied product information, the total panel area is less than 2 square metres, making the system suitable for compact residential applications.

The panels use full-black components, providing a clean and modern appearance. The supplied specifications state resistance to wind loads of up to 2400 Pa and snow loads of up to 5400 Pa.

EVT 560 Microinverter

The system includes an EVT 560 microinverter designed to connect two solar panels. According to the supplied datasheet, the single-phase microinverter supports an input range of 180W to 400W+ for each connected panel.

The microinverter uses MPPT technology to optimize solar panel operation and maximize available solar energy harvesting. Its design is intended to allow fast and convenient installation.

TP-Link Tapo Smart Wi-Fi Plug

The kit includes a TP-Link Tapo Smart Wi-Fi plug for additional monitoring and control functions. Through the Tapo application, users can monitor information about generated energy and electricity savings from a smartphone.

According to the supplied information, the smart plug supports remote control, scheduling, timer functions and voice control through Alexa or Google Assistant. No additional hub is required, simplifying setup and everyday operation.

Easy Balcony Installation

The balcony solar system is designed with simple installation in mind. The kit includes two sets of 304 stainless steel balcony hooks designed for mounting the solar panels to a balcony structure.

According to the supplied product information, the system can also be used for wall, garden, floor and outdoor applications, depending on the selected installation configuration.

Complete Plug&Play Solar System

The Plug&Play concept is designed to simplify installation. The kit contains the main components required for a compact balcony photovoltaic system, including two solar panels, an EVT 560 microinverter, balcony mounting hooks, a smart Wi-Fi plug and a 5-metre AC cable.

The supplied technical material describes the system as suitable for easy installation and DIY use according to the provided instructions. When connecting the system to an electrical installation, all applicable local electrical and regulatory requirements must be followed.

Clean Solar Energy Generation

The balcony photovoltaic system allows solar energy to be generated close to the point of consumption. According to the supplied PDF datasheet, the system can achieve an annual yield of approximately 800 kWh under suitable conditions.

The supplied information indicates potential savings of approximately €250 per year. Actual results depend on solar exposure, sunlight hours, panel orientation and inclination, installation conditions and the user's electricity consumption.

Main Specifications

• Type: Plug&Play balcony solar power system
• Solar panels: 2 × DHM54T35MR/395-415W
• Panel power: 395–415W
• Cells: 182 multi bus bar monocrystalline silicon cells
• Maximum panel efficiency: 21.25%
• Wind load resistance: 2400 Pa
• Snow load resistance: 5400 Pa
• Microinverter: EVT 560
• Microinverter type: Single-phase
• MPPT: Yes
• Smart control: TP-Link Tapo Wi-Fi plug
• Balcony mounting brackets: 2 sets, 304 stainless steel
• AC cable: 1T, 5 m
• Designed service life: 25 years
• Specified annual yield: approximately 800 kWh

Compact Solar Solution for Balconies, Gardens and Walls

The Plug&Play Balcony Solar Power System is a practical solution for users who want to make use of available balcony or other suitable outdoor space for solar electricity generation. Its compact configuration, microinverter, smart Wi-Fi plug and mounting components provide a convenient solution for small photovoltaic installations.

Important: The stated annual yield, savings and payback figures are values provided in the supplied technical material and are not guaranteed results. Actual electricity generation depends on the specific installation conditions and available solar resource.