30kW THREE-PHASE SOLAR SYSTEM with a 30kW Three-Phase Hybrid Inverter + 48kWh Battery Storage + 33kWp Solar Panels for a Tile Roofing
-
Code:CHISAGE--30kW1P(3x10kW1PChisage)+48kWh+33kWp-keremida
-
Weight:2400.000 Kgs
Quick Buy
30kW Three-Phase Solar System Configuration with 48kWh LiFePO4 Batteries and 33kWp JA Solar Panels – for Tiled Roof
The 30kW Hybrid Solar System with 48kWh Battery Storage and 33kWp Solar Panels for Tiled Roofs is a comprehensive photovoltaic equipment package designed for high-capacity solar energy generation and battery storage.
The package includes three CHISAGE Jup-10G2-LE-10kW single-phase low-voltage hybrid inverters, three CHISAGE MOON16-GPro 16.08kWh LiFePO4 batteries and 54 JA Solar 605Wp N-Type bifacial photovoltaic modules.
The combined rated inverter capacity is 30kW, the total nominal battery capacity is 48.24kWh, and the installed photovoltaic capacity is 32.67kWp, commercially rounded to 33kWp.
Designed for pitched tiled roofs, the package includes adjustable roof hooks, aluminum mounting rails, rail connectors and panel clamps, together with photovoltaic cables, DC protection boards, a three-phase AC protection board and grounding materials.
Three-phase configuration note: The package contains three separate single-phase inverters rather than one native 30kW three-phase inverter. Their suitability for synchronized three-phase operation must be verified with the manufacturer for the exact system configuration.
Key Features and Benefits
- 30kW combined rated inverter capacity – three CHISAGE 10kW hybrid inverters.
- 32.67kWp installed photovoltaic capacity – 54 JA Solar 605Wp bifacial panels.
- 48.24kWh nominal battery storage – three CHISAGE MOON16-GPro LiFePO4 batteries.
- Low-voltage battery technology – 51.2V nominal voltage per battery.
- EVE battery cells – with CN battery management systems.
- 6000 stated battery cycles – subject to manufacturer operating conditions.
- WiFi adapters included – one with each hybrid inverter.
- N-Type bifacial solar technology – potential additional generation from reflected sunlight.
- Dedicated tiled roof mounting structure – 120 adjustable roof hooks and 60 aluminum mounting rails.
- DC and AC electrical protection equipment – included in the package.
- Photovoltaic cables and grounding materials – included for system installation.
- Delivery and transport included – according to the quotation.
Technical Specifications
| Parameter | Specification |
|---|---|
| System Type | Hybrid Photovoltaic System with Battery Storage |
| Intended Configuration | Three-Phase – Subject to Compatibility Verification |
| Included Inverter Type | Single-Phase Low-Voltage Hybrid |
| Inverter Manufacturer | CHISAGE |
| Inverter Model | Jup-10G2-LE-10kW |
| Number of Inverters | 3 |
| Rated Power per Inverter | 10kW |
| Combined Rated Inverter Capacity | 30kW (3 × 10kW) |
| WiFi | WiFi Adapter Included with Each Inverter |
| Inverter Warranty Stated in Quotation | 12 Years |
| Battery Manufacturer | CHISAGE |
| Battery Model | MOON16-GPro |
| Number of Batteries | 3 |
| Battery Chemistry | LiFePO4 |
| Nominal Capacity per Battery | 16.08kWh |
| Total Nominal Battery Capacity | 48.24kWh |
| Nominal Battery Voltage | 51.2V |
| Battery Capacity | 320Ah per Battery |
| Battery Cells | EVE |
| Battery Management System | CN BMS |
| Stated Battery Cycle Life | 6000 Cycles |
| Battery Installation | Floor-Mounted or Wall-Mounted |
| Solar Panel Manufacturer | JA Solar |
| Solar Panel Model | JAM72D40-605/MB-SF |
| Number of Solar Panels | 54 |
| Rated Power per Panel | 605Wp |
| Total Installed PV Capacity | 32.67kWp |
| Solar Cell Technology | N-Type Bifacial |
| Frame Color | Grey |
| Solar Panel Dimensions | 2278 × 1134 × 30 mm |
| Roof Application | Pitched Tiled Roof |
| Adjustable Roof Hooks | 120 pcs, TRH-T06 |
| Aluminum Mounting Rails | 60 pcs × 2.2 m |
| Rail Connectors | 58 pcs × 200 mm |
| Mid Clamps | 100 pcs |
| End Clamps | 34 pcs |
| DC Protection Boards | 3 pcs, Two-String, 600V, 16A, IP20 |
| AC Protection Board | 1 pc, Three-Phase AC-3Phase-12-20KW |
| Delivery / Transport | Included |
| Installation | Not Included |
Complete Package Contents
| No. | Product Code | Component Description | Quantity |
|---|---|---|---|
| 1 | Jup-10G2-LE-10kW | CHISAGE 10kW Single-Phase Low-Voltage Hybrid Inverter with WiFi Adapter | 3 pcs |
| 2 | MOON16-GPro | CHISAGE LiFePO4 Battery, 16.08kWh, 51.2V, 320Ah, EVE Cells, CN BMS | 3 pcs |
| 3 | JAM72D40-605/MB-SF | JA Solar 605Wp N-Type Bifacial Solar Panel, Grey Frame | 54 pcs |
| 4 | IM058002-403 | TRH-T06 Adjustable Mounting Hook for Tiled Roofs | 120 pcs |
| 5 | O9601 | Aluminum Mounting Rail, 27 × 45 mm, Length 2.2 m | 60 pcs |
| 6 | O9610 | Aluminum Rail Connector, 200 mm | 58 pcs |
| 7 | O9604 | Solar Panel Mid Clamp, Listed for 35 mm Frames | 100 pcs |
| 8 | O9603 | End Clamp M8 × 25 mm with Inner Bolt and T-Fixture, Listed for 35 mm Frames | 34 pcs |
| 9 | 730600015064QUSW | KBE H1Z2Z2-K Black Solar Cable, 1 × 6 mm², 1500V DC | 150 units* |
| 10 | 730600015064QURT | KBE H1Z2Z2-K Red Solar Cable, 1 × 6 mm², 1500V DC | 150 units* |
| 11 | 240220024 | ШВПСВ Power Cable, 3 × 10 mm² | 30 units* |
| 12 | 400020022 | Hot-Dip Galvanized Grounding Rod, Ø20 mm, 1.5 m | 4 pcs |
| 13 | 400030032 | Cross Grounding Clamp for Ø20 mm Rod and 40/4 Strip | 2 pcs |
| 14 | 240100059 | Yellow-Green Grounding Conductor, 10 mm² | 25 units* |
| 15 | DC2-600V16AIP20 | Two-String DC Protection Board, 600V, 16A, IP20, with Lightning Protection Components | 3 pcs |
| 16 | AC-3Phase-12-20KW | Three-Phase AC Protection Board with Lightning Protection, ATS and Fuses, Listed for 12–20kW Hybrid Inverters | 1 pc |
| 17 | 800000043 | Delivery / Transport | 1 service |
| 18 | SKU1010101010 | Equipment Installation Not Included in the Price | 1 note |
* The quotation lists cable quantities using a general piece-based unit. Actual linear lengths should be confirmed before ordering.
Three CHISAGE Jup-10G2-LE-10kW Hybrid Inverters
The inverter package consists of three CHISAGE Jup-10G2-LE-10kW units, each rated at 10kW.
These are single-phase low-voltage hybrid inverters designed for photovoltaic energy generation and compatible battery storage applications.
Hybrid inverter technology supports the management of solar electricity and stored energy according to the supported operating modes and electrical configuration.
Each inverter is supplied with a WiFi adapter. The quotation specifies a 12-year warranty for the inverters.
Important: The combined rated inverter capacity is 30kW, but the three supplied units are single-phase models. Synchronized three-phase operation must be verified with the manufacturer before installation.
48.24kWh CHISAGE MOON16-GPro LiFePO4 Battery Storage
The system includes three CHISAGE MOON16-GPro lithium iron phosphate batteries, each rated at 16.08kWh.
The combined nominal storage capacity is:
3 × 16.08kWh = 48.24kWh
Each battery has a nominal voltage of 51.2V and a capacity of 320Ah.
The supplied specifications identify EVE battery cells, a CN battery management system and a stated cycle life of 6000 cycles under manufacturer-defined conditions.
The batteries are designed for floor-mounted or wall-mounted installation according to the manufacturer's instructions.
Battery storage allows part of the electricity generated during daylight hours to be used later, depending on inverter operating modes, battery settings and connected loads.
The actual usable capacity depends on depth-of-discharge settings and operating conditions.
54 JA Solar 605Wp Bifacial Panels – 32.67kWp Installed Capacity
The photovoltaic array consists of 54 JA Solar JAM72D40-605/MB-SF N-Type bifacial modules.
Each panel is rated at 605Wp, providing a total installed solar capacity of:
54 × 605Wp = 32,670Wp = 32.67kWp
The modules use N-Type bifacial photovoltaic technology, allowing electricity generation from sunlight reaching the front surface and potentially from reflected sunlight reaching the rear surface.
Each panel measures 2278 × 1134 × 30 mm and features a grey frame.
On tiled roofs, any additional bifacial energy yield depends on mounting clearance, tile color, surface reflectivity and installation geometry.
Actual electricity production varies with location, irradiation, orientation, tilt, temperature and shading.
Dedicated Mounting Structure for Pitched Tiled Roofs
This package includes a tiled roof mounting structure based on adjustable roof hooks and long aluminum mounting rails.
The mounting components include:
- 120 TRH-T06 adjustable roof hooks (IM058002-403) – for attachment to a suitable supporting roof structure.
- 60 O9601 aluminum mounting rails – 27 × 45 mm profile, 2.2 m length.
- 58 O9610 rail connectors – 200 mm length.
- 100 O9604 mid clamps – for securing adjacent photovoltaic modules.
- 34 O9603 end clamps – for securing the modules at the ends of mounting rows.
The adjustable roof hooks accommodate certain variations in pitched tiled roof construction, while the aluminum rails form the supporting structure for the photovoltaic modules.
Unlike sandwich panel roof mounting systems, this configuration uses roof hooks and long mounting rails rather than compact mounting profiles.
Compatibility check: The solar modules have 30 mm frames, while the listed mid and end clamps are specified for 35 mm frames. Appropriate clamp sizing must be confirmed before installation.
The mounting design must account for roof construction, tile type, waterproofing, fastening positions and local wind and snow loads.
DC and Three-Phase AC Protection Equipment
The package includes three DC2-600V16AIP20 DC protection boards, described as two-string boards rated at 600V, 16A and IP20, with lightning protection components.
It also includes one AC-3Phase-12-20KW three-phase AC protection board with lightning protection, ATS and fuses.
Electrical design note: The AC board is listed for 12–20kW hybrid inverters, while the combined rated inverter capacity in this package is 30kW. The suitability of the AC board and protective devices must be verified for the final electrical configuration.
The DC protection ratings must also be checked against the actual photovoltaic string voltages and currents.
Solar Cables and Grounding Materials
The package includes black and red KBE H1Z2Z2-K 1 × 6 mm² photovoltaic cables, specified for 1500V DC applications.
Also included are 3 × 10 mm² power cable, four hot-dip galvanized grounding rods measuring 1.5 m each, two cross grounding clamps and yellow-green 10 mm² grounding conductor.
Final cable lengths, conductor sizing and grounding arrangements must be verified according to the electrical design and applicable safety requirements.
Applications of the 30kW Hybrid Solar System
- Large residential properties – solar self-consumption and battery storage.
- Farms and agricultural buildings – for suitable electrical installations.
- Commercial and office buildings – reducing daytime grid electricity consumption.
- Workshops and service facilities – for compatible electrical loads.
- Warehouses and production buildings – subject to electrical design verification.
- Buildings with pitched tiled roofs – subject to structural assessment and approved mounting design.
Frequently Asked Questions
Does the package include one 30kW three-phase inverter?
No. It includes three separate CHISAGE 10kW single-phase hybrid inverters. Their suitability for synchronized three-phase operation must be confirmed by the manufacturer.
What is the total nominal battery capacity?
The three CHISAGE MOON16-GPro batteries provide a combined nominal capacity of 48.24kWh.
How many solar panels are included?
The package includes 54 JA Solar 605Wp bifacial modules, providing 32.67kWp of installed photovoltaic capacity.
Is the mounting structure designed for tiled roofs?
Yes. The package includes adjustable roof hooks, aluminum rails, rail connectors and panel clamps for suitable pitched tiled roofs. Final compatibility depends on the roof structure and installation design.
Can the system store solar energy for later use?
Yes. The included LiFePO4 batteries are designed for electricity storage. Actual charging and discharging modes depend on inverter and battery compatibility and system settings.
Are electrical protection components included?
Yes. Three DC protection boards and one three-phase AC protection board are included. Their electrical ratings and compatibility must be verified during system design.
Is installation included?
No. Equipment installation is not included in the package price.
30kW CHISAGE Hybrid Solar System with 48kWh Batteries and 33kWp Panels for Tiled Roof – Order from VOLTON.BG
Choose the 30kW Hybrid Solar System with 3 × 10kW CHISAGE Inverters, 48.24kWh LiFePO4 Battery Storage and 32.67kWp JA Solar Panels for a high-capacity photovoltaic installation on a suitable pitched tiled roof.
Order from VOLTON.BG or contact our sales team for current pricing, availability, technical consultation and assistance with verifying the intended three-phase configuration.
Phone: +359 878 307765
Email: sales@volton.bg
Website: www.volton.bg
-
Warranty:12 years